|
Connector Selection / Identification
Connector selection / Identification can be very complex, and often it is best to talk direct with our expert staff when designing in a new connector or trying to identify a connector that you already have.
Here is a list of the most common information that might help us select the right connector for you. (These specifications may not all be relevant to your particular application).
For new designs:
Our products overview page has pictures and basic specifications all on one simple page.
If you need to be compatible with a specific connector type please advise type
If you have a manufacturer preference please advise manufacturer
Current and voltage requirements
Total contacts per connector
Type of contact material (gold plate etc)
Crimp, solder or screw contacts
Which half to have male contacts and which to have female contacts
Does the cable have just one round outer sheath
Cable outside diameter
Cable conductor size
Panel mount or cable mount connector body styles
IP rating (degree of waterproofing) - see our IP Ratings chart.
Backshell type (straight/right angle, gland-seal, shield terminating etc)
Shell material and finish (metal, plastic or composite bodies, cadmium or nickel plate etc)
Dimension restrictions
How soon are the connectors required?
Which is more important - low cost or high quality?
Quantity required.
For identifying a connector that you already have:
A quick scan of the pictures on our products overview page may help you identify the series.
All alphanumeric characters written on your connector (including between the pins)
Manufacturer
Total number of contacts per connector
Male or female contacts
Gold, nickel or other contact plating
Crimp, solder or screw contacts
Panel mount or cable mount
Colour
Metal or plastic shell
Dimensions
Please contact us and our experienced staff will find the right product for your application.
|
